6 common breast pumping mistakes to avoid

6 common breast pumping mistakes to avoid

A pump is a great tool for every breastfeeding mom. It gives you the flexibility to provide breastmilk to your baby even when you need to be away for some time. Or when your baby is not latching. Thus, pumping makes a mom’s life a little easier. At the same time, the pumping process can be frustrating and uncomfortable. However, making a few changes to your process or learning new techniques makes a lot of difference.

Here are a few common pumping mistakes and ways to rectify them.

Not using hands-free pumping bras
If you are exclusively pumping and not nursing, it can keep you occupied for a significant amount of time daily. So you may end up sitting there holding your bra in place for almost two hours. Whether you wish to multitask or relax by scrolling through your phone or reading a book, you won’t be able to. The time you spend pumping will be completely blocked by this activity.

What you can do
Purchase a couple of hands-free pumping bras. These will make things easier for you. With your hands free, you can multitask while you are pumping. While buying these bras, make sure what your requirements are. This is because some of these bras are made to be worn throughout the day, while others have been designed to be worn only when you are pumping.

Using the wrong flange size
The flange of a breast pump is the cup-shaped end that has to be fitted over the breast. It is an important part of the pump since it stimulates the breast to produce milk. Its size should be right, just like the cup size of a bra. The wrong size will cause discomfort, such as nipple pain, elastic nipple, and difficulty in pumping. Furthermore, it will be difficult to pump out the quantity of milk that you require.
What you can do
To begin with, measure the nipple diameter at the base. The best time to do this is after a feed. This will give you the correct size of the flange that you need to use. Most flanges are available in sizes ranging between 19mm and 36mm. To ensure maximum comfort and ease of use of the pump, get a flange that is 3mm to 5mm larger than the nipple diameter.

Using excessive suction
This is a mistake that is usually made by those new to pumping. Most assume that the stronger the suction is, the higher the quantity of milk produced. However, the contrary happens. When you pump with higher intensity, it will cause inflammation on the surface of your breast and the nipple area. This will make it difficult to produce adequate quantities of milk.
What you can do
To avoid discomfort and pain, start pumping with the lowest settings. You can change the setting over time as you understand the level of suction your body can tolerate without affecting the quantity of milk released. You can go from low to medium and then proceed to high levels. In most cases, medium suction is what works best. This way, you can also get the most out of your breast pump.

Not breast pumping for enough duration
Even with the right flange and pump, you may not have enough milk in one pumping session. This happens when you do not pump for a long enough duration. Also, the amount of milk released after pumping for the may length of time will be different for everyone. For example, some women get 2.4oz of milk after pumping for 5 minutes, while some get the same amount after pumping for 20 minutes.
What you can do
Just like breastfeeding, the experience of pumping differs for everyone. So it is important to be patient and get the hang of pumping. In most cases, there is generally a time just before milk is pumped out. During this time, the pump has to work a little faster to stimulate a letdown. After this, you will be able to pump out enough milk for about 15 to 20 minutes. You must continue pumping until the milk flow starts slowing down for about 2 to 3 minutes.

Focusing too much on building a freezer stash
It is said you need to feed your baby and not the freezer. One of the hardest parts of being a mom, among many other things, is worrying about whether your baby has enough nutrients. When you stress over the fact that your baby has enough food available, you end up stuffing your freezer with your breast milk. So the milk in the freezer becomes a source of stress for you. This can affect your pumping experience. Excessive pumping may also cause a lot of discomfort and pain in the process.
What you can do
When building your freezer stash of breast milk is stressing you out, you need to change your focus. You can do this by planning to pump enough milk to feed your baby today. You don’t have to worry about tomorrow. Do this unless you will not be able to pump the next day or the next couple of days due to travel, work, or health issues.

Avoiding your health
When you don’t eat enough healthy food and don’t drink enough water, it will affect the quantity as well as quality of the breast milk you are pumping out. According to the CDC, a breastfeeding mother needs to consume at least 330 to 400 kilocalories (kcal) more per day than what they were having before pregnancy. Furthermore, you need to drink 8 to 10 glasses of water daily.
What you can do
Make sure you are eating healthy meals consisting of whole foods. You don’t have to count your exact calories. But you must ensure you are eating full and frequent meals and snacks with nutrient-dense foods. Just like how you plan and schedule your pumping sessions, you can make meal plans and set timers that remind you to drink water daily.

Read Also

Know more about exciting & latest articles right here

12 surprising facts about COPD to know

12 surprising facts about COPD to know

Chronic Obstructive Pulmonary Disease, also known as COPD, is a well-recognized respiratory ailment that affects millions of lives worldwide. COPD, characterized by symptoms like chronic cough, shortness of breath, and reduced lung function, is a complex condition with multiple layers. While its core features are understood by many, an array of surprising and often overlooked facets surrounds this condition. This article delves into these lesser-known aspects of COPD to comprehensively understand the disease. Underdiagnosed and misdiagnosed cases One of the most surprising facts about COPD is the prevalence of underdiagnosed and misdiagnosed cases. According to the World Health Organization (WHO), more than 90% of COPD cases are estimated to remain undiagnosed. This is partly because early symptoms, such as coughing and shortness of breath, are often attributed to the natural aging process or other respiratory conditions. Additionally, many individuals with COPD do not seek attention until the disease has progressed significantly. Impact on mental health COPD not only affects physical health but also takes a toll on mental well-being. Surprisingly, individuals with COPD are more likely to experience anxiety and depression. The disease’s chronic nature and its impact on daily activities and social interactions may lead to isolation and sadness.
Read More
7 lesser-known signs of multiple myeloma

7 lesser-known signs of multiple myeloma

Multiple myeloma is a type of cancer that primarily affects the plasma cells found in the bone marrow. Plasma cells typically produce antibodies to help the body fight infections. However, in multiple myeloma, certain plasma cells become cancerous and start to multiply uncontrollably, crowding out healthy blood-forming cells in the bone marrow. These cancerous plasma cells can produce abnormal proteins, which can accumulate in the blood and urine, leading to various health problems. Here are the lesser-known signs of multiple myeloma: Recurrent infections Multiple myeloma weakens the immune system, making individuals more susceptible to infections. However, this sign is often overlooked or attributed to other causes. Recurring or persistent infections, such as respiratory infections, urinary tract infections, or skin infections, can be an early indication of an underlying immune system dysfunction caused by multiple myeloma. The connection between multiple myeloma and infections lies in the disease’s impact on plasma cells’ production of antibodies. As the cancerous plasma cells multiply in the bone marrow, they crowd out healthy cells responsible for producing antibodies, impairing the body’s ability to fight infections effectively. Recognizing the link between recurring infections and multiple myeloma can lead to earlier diagnosis and treatment, which may improve the patient’s overall prognosis.
Read More
9 tips for changing the oil and filter on Dodge vehicles

9 tips for changing the oil and filter on Dodge vehicles

Dodge is a famous automobile manufacturer with an excellent lineup of trucks and SUVs. While its vehicles are known for performance and durability, they must be maintained well. A fundamental aspect of car upkeep is changing the oil and filters regularly. Whether one owns a robust Dodge truck or a versatile SUV, understanding the nuances of oil and filter changes can help the automobile run smoothly and extend its lifespan. The function of oil and filters in a vehicle Engine oil is a lubricating fluid that circulates throughout the engine to reduce friction between moving parts, dissipate heat, and protect against wear and tear. The oil filter is responsible for removing impurities and contaminants from the engine oil. The filter is replaced during routine oil changes to maintain its filtration capabilities. Tips for changing oil and filters in vehicles Oil and filters play crucial roles in the vehicle’s engine, ensuring it operates efficiently and remains in good condition. If one follows these tips, it will not only ensure engine longevity but also contribute to better fuel efficiency and reduced emissions: Use the right tools and materials Before starting, it’s important to gather all the right tools. One will need an oil filter wrench to remove the old filter, a container to catch the old oil (like an oil drain pan), a set of sockets or wrenches, a funnel to pour in new oil, a new oil filter, and the right type and sufficient amount of oil.
Read More
25 signs and symptoms of pneumonia to know of

25 signs and symptoms of pneumonia to know of

Pneumonia is a common respiratory infection that can affect people of all ages, causing various symptoms that vary in severity. At the same time, many are familiar with the hallmark signs such as fever and cough, shortness of breath, chest pain, and numerous other indicators that can point to pneumonia. This comprehensive article thoroughly explores pneumonia’s signs and symptoms, helping individuals recognize the condition early and seek appropriate medical care. Fever Fever is one of the most prevalent symptoms of pneumonia. It typically presents with a high body temperature, often exceeding 100.4°F (38°C). Fever is the body’s natural response to infection and signifies that the immune system is actively fighting the pneumonia-causing pathogens. Cough A persistent cough is another hallmark symptom. It can produce different types of mucus, including yellow, green, or bloody. The cough may be accompanied by chest pain or discomfort ranging from mild to severe. Shortness of breath Many individuals with pneumonia experience shortness of breath, particularly when engaging in physical activities. This symptom occurs due to the inflammation and infection within the lungs, making it challenging for the respiratory system to function optimally. Chest pain Chest pain is often described as a sharp or stabbing sensation typically felt on the side of the affected lung.
Read More