Home | auto | 9 Tips For Changing The Oil And Filter On Dodge Vehicles

9 tips for changing the oil and filter on Dodge vehicles

9 tips for changing the oil and filter on Dodge vehicles

Dodge is a famous automobile manufacturer with an excellent lineup of trucks and SUVs. While its vehicles are known for performance and durability, they must be maintained well. A fundamental aspect of car upkeep is changing the oil and filters regularly. Whether one owns a robust Dodge truck or a versatile SUV, understanding the nuances of oil and filter changes can help the automobile run smoothly and extend its lifespan.

The function of oil and filters in a vehicle
Engine oil is a lubricating fluid that circulates throughout the engine to reduce friction between moving parts, dissipate heat, and protect against wear and tear. The oil filter is responsible for removing impurities and contaminants from the engine oil. The filter is replaced during routine oil changes to maintain its filtration capabilities.

Tips for changing oil and filters in vehicles
Oil and filters play crucial roles in the vehicle’s engine, ensuring it operates efficiently and remains in good condition. If one follows these tips, it will not only ensure engine longevity but also contribute to better fuel efficiency and reduced emissions:

Use the right tools and materials
Before starting, it’s important to gather all the right tools. One will need an oil filter wrench to remove the old filter, a container to catch the old oil (like an oil drain pan), a set of sockets or wrenches, a funnel to pour in new oil, a new oil filter, and the right type and sufficient amount of oil. Using the right tools and materials not only simplifies the process but also ensures one performs the oil change accurately and safely.

Have safety gear handy
One should always work in a place where there’s fresh air and put on safety gear like gloves and safety glasses for protection. Gloves defend one’s hands from contact with hot oil, sharp tools, and potentially harmful chemicals, preventing burns and cuts. Safety glasses, on the other hand, shield the eyes from splashing oil and debris.

Warm up the engine
Cold engine oil is thicker and flows less freely. Warming up the oil can make it easier to drain out later during the oil change. As the oil warms up, it also suspends and carries away contaminants like dirt and debris, which might have settled in the engine. To warm the oil, one can start the car and let it run for a few minutes before beginning the work.

Use the right oil and filter
A particular Dodge model and engine type may require a specific oil viscosity and formulation to function at its best. Using the right oil ensures proper lubrication and protection. Conversely, using an incorrect filter may compromise the filtration process, potentially allowing harmful particles to circulate in the engine. One can find detailed information on the recommended oil type, viscosity, and filter specifications in the owner’s manual. One can also find this information on labels and product descriptions.

Lift the vehicle
One might need to lift the car off the ground a bit to reach the oil drain plug and filter. Individuals can do this with a car jack and jack stands, but one should ensure the vehicle is stable and safe before going underneath it.

Lubricate the new filter
Before putting on the new oil filter, one is advised to rub a little bit of clean oil onto the rubber ring around the top of the filter. This helps seal it properly, prevents leaks, and enables easy removal during the next oil change. One can screw on the new oil filter by hand.

Use a drain pan
The oil drain plug is like a little bolt, usually at the engine’s very bottom. Once the plug is loosened, remove it completely and let the old oil pour into the pan. Ensure the pan is in the right spot to catch all the oil. Using a drain pan prevents the oil from spilling onto the ground. This minimizes mess and cleanup and reduces the risk of environmental contamination and safety hazards.

Check the oil level and start the engine
Checking the oil level and starting the engine after an oil change is crucial to verify if the correct amount of oil has been added. It also lets the new oil to circulate throughout the engine. This ensures all engine components are properly lubricated, minimizing friction and wear and maintaining optimal engine performance and longevity. Additionally, it helps identify potential leaks or issues with the oil system before resuming regular vehicle operation.

Check for oil leaks
After changing the oil and filter, one is advised to monitor the vehicle for oil leaks in the days following the maintenance. One should address any leaks promptly by tightening the drain plug or oil filter and replacing damaged gaskets or seals. It helps prevent potential engine damage and oil loss.

How frequently should one change the oil and filters?
Changing a vehicle’s oil is a critical aspect of regular maintenance. The frequency at which one should do it depends on various factors, including the type of oil one uses, driving habits, and the manufacturer’s recommendations. On average, for many modern vehicles that use conventional oil, changing the oil every 7,000 to 10,000 miles is often recommended. However, one should ideally go by the vehicle manual, as some oil formulations may allow longer intervals between oil changes.

When it comes to oil filters, here are a few warning signs they need a change:

  • Reduced engine power and acceleration
  • Decreased fuel efficiency
  • Unusual engine noises, such as wheezing or rattling
  • Visible buildup of dirt and debris on the filter itself
  • Engine overheating due to poor cooling
  • Dark or thick engine oil
  • Maintenance light illuminated on one’s dashboard
  • Emission of dirty exhaust fumes

Read Also

Know more about exciting & latest articles right here

12 surprising facts about COPD to know

12 surprising facts about COPD to know

Chronic Obstructive Pulmonary Disease, also known as COPD, is a well-recognized respiratory ailment that affects millions of lives worldwide. COPD, characterized by symptoms like chronic cough, shortness of breath, and reduced lung function, is a complex condition with multiple layers. While its core features are understood by many, an array of surprising and often overlooked facets surrounds this condition. This article delves into these lesser-known aspects of COPD to comprehensively understand the disease. Underdiagnosed and misdiagnosed cases One of the most surprising facts about COPD is the prevalence of underdiagnosed and misdiagnosed cases. According to the World Health Organization (WHO), more than 90% of COPD cases are estimated to remain undiagnosed. This is partly because early symptoms, such as coughing and shortness of breath, are often attributed to the natural aging process or other respiratory conditions. Additionally, many individuals with COPD do not seek attention until the disease has progressed significantly. Impact on mental health COPD not only affects physical health but also takes a toll on mental well-being. Surprisingly, individuals with COPD are more likely to experience anxiety and depression. The disease’s chronic nature and its impact on daily activities and social interactions may lead to isolation and sadness.
Read More
7 lesser-known signs of multiple myeloma

7 lesser-known signs of multiple myeloma

Multiple myeloma is a type of cancer that primarily affects the plasma cells found in the bone marrow. Plasma cells typically produce antibodies to help the body fight infections. However, in multiple myeloma, certain plasma cells become cancerous and start to multiply uncontrollably, crowding out healthy blood-forming cells in the bone marrow. These cancerous plasma cells can produce abnormal proteins, which can accumulate in the blood and urine, leading to various health problems. Here are the lesser-known signs of multiple myeloma: Recurrent infections Multiple myeloma weakens the immune system, making individuals more susceptible to infections. However, this sign is often overlooked or attributed to other causes. Recurring or persistent infections, such as respiratory infections, urinary tract infections, or skin infections, can be an early indication of an underlying immune system dysfunction caused by multiple myeloma. The connection between multiple myeloma and infections lies in the disease’s impact on plasma cells’ production of antibodies. As the cancerous plasma cells multiply in the bone marrow, they crowd out healthy cells responsible for producing antibodies, impairing the body’s ability to fight infections effectively. Recognizing the link between recurring infections and multiple myeloma can lead to earlier diagnosis and treatment, which may improve the patient’s overall prognosis.
Read More
25 signs and symptoms of pneumonia to know of

25 signs and symptoms of pneumonia to know of

Pneumonia is a common respiratory infection that can affect people of all ages, causing various symptoms that vary in severity. At the same time, many are familiar with the hallmark signs such as fever and cough, shortness of breath, chest pain, and numerous other indicators that can point to pneumonia. This comprehensive article thoroughly explores pneumonia’s signs and symptoms, helping individuals recognize the condition early and seek appropriate medical care. Fever Fever is one of the most prevalent symptoms of pneumonia. It typically presents with a high body temperature, often exceeding 100.4°F (38°C). Fever is the body’s natural response to infection and signifies that the immune system is actively fighting the pneumonia-causing pathogens. Cough A persistent cough is another hallmark symptom. It can produce different types of mucus, including yellow, green, or bloody. The cough may be accompanied by chest pain or discomfort ranging from mild to severe. Shortness of breath Many individuals with pneumonia experience shortness of breath, particularly when engaging in physical activities. This symptom occurs due to the inflammation and infection within the lungs, making it challenging for the respiratory system to function optimally. Chest pain Chest pain is often described as a sharp or stabbing sensation typically felt on the side of the affected lung.
Read More
Muscular dystrophy – Signs and management options

Muscular dystrophy – Signs and management options

Muscular dystrophy is a group of genetic muscle disorders that cause the progressive weakening and degeneration of muscle tissue. These conditions can affect people of all ages and cause various degrees of muscle weakness and disability. Early detection and subsequent treatments can significantly improve the quality of life for those affected. Here are some early warning signs of muscular dystrophy and treatment options. Muscle weakness Muscle weakness is often one of the earliest signs of muscular dystrophy. Muscular dystrophy is characterized by the deterioration of muscle fibers, making them less capable of contracting and generating force. As muscle fibers weaken and die, muscle strength diminishes. Affected individuals may experience difficulty performing simple tasks like lifting objects, climbing stairs, or getting up from a seated position. This weakness typically begins in the muscles closest to the trunk of the body and gradually spreads to other muscle groups. Frequent falls Muscle weakness can affect the stability and coordination required to maintain balance. As the muscles weaken, the ability to react quickly to changes in posture or movement diminishes, leading to an increased risk of falls. Children with muscular dystrophy may tend to fall more often than their peers, especially when running or participating in physical activities.
Read More